Technical

11 articles

Four steps to identify a SID or PCR job: read the label, name the variant, match tool and route, build or hand it on.

Technical9 min de lecture

SID807 Tuning and PCR2.1 Notes: What to Check Before the Bench

A working note for experienced tuners on Continental and Siemens diesel ECUs: where SID807 and PCR2.1 turn up, how to pin down the exact variant, what to settle before you pick a read route, how checksums and backups fit in, and when to pass the job to a partner.

Five checks to identify a Bosch ECU as EDC17 or MED17 before quoting the file.

Technical10 min de lecture

EDC17 vs MED17: The Tuner's Field Guide to Bosch Diesel and Petrol ECUs

EDC17 and MED17 sit side by side on every tool's vehicle list, but they are different jobs: one is Bosch's diesel ECU, the other its direct-injection petrol one. This field guide shows how to tell them apart, what changes in the file, why the exact variant matters more than the family, and when to hand the job to an engineer.

Five terms in order on one job: original read, identification, tuning file, checksum correction, flash.

Technical11 min de lecture

What Is a Remap? A Chiptuning Glossary for Tuners and Dealers

Ask three tuners what a slave file is and you may get three answers. This glossary explains the words you meet when you order tuning files, from ori and tuning file to master, slave, checksum, DTC and map, in short plain definitions grouped by where each term turns up on a real job.